
Cosmetic dentist · veneers & smile design
Veneers, smile design and smile makeovers are the centre of her work: porcelain, E.max and composite veneers planned on a trial smile first.
Leave your name and number and we will arrange a time that suits you.
WhatsApp+971 4 342 4444Your first consultation is complimentary.
E.max veneers are often written as Emax veneers or e-max veneers — the same lithium disilicate ceramic.
Thin, strong and translucent: the ceramic most veneer cases are made from. Designed around your face, milled and hand-finished in the laboratory in the same building as your dentist.
Consultation includes examination, photographs and a written plan. No preparation happens on the first visit.

Filmed at Creative Arts in Jumeirah. Each smile is planned in the clinic and finished by hand in Creative Art Dental Lab, in the same building.
Each story shows what the patient wanted to change, how the smile was planned, and the finished result.
Ahmad: yellowed, patchy teeth turned into an even, bright smile with porcelain veneers
Cynthia: a finished smile with digitally designed porcelain veneers
Dana: digitally designed porcelain veneers seen from the side
Daneal: a front-teeth gap and uneven edges turned into one continuous, even smile
Hadel: digitally designed porcelain veneers with balanced front-tooth length
Hesham: a broad, even smile with digitally designed porcelain veneers
Manar: yellowed teeth with worn, chipped edges turned into an even smile from every angle
Nataly: front teeth in mixed shades turned into a Hollywood smile in one even white
A man's new smile: even, bright upper and lower teeth framed by a full beard
A woman's new smile: an even, bright result on the upper and lower teeth
Parshang: short, uneven teeth and two mismatched arches turned into one balanced smile
Shahed: brown stain between the front teeth and chipped edges turned into a clean, even smileDesigned in the clinic and made by hand in Creative Art Dental Lab, in the same building in Jumeirah, Dubai.








Who plans your smile

Cosmetic dentist · veneers & smile design
Veneers, smile design and smile makeovers are the centre of her work: porcelain, E.max and composite veneers planned on a trial smile first.

Dentist · veneers, cosmetic & implant dentistry
Plans veneers, smile design and full-mouth rehabilitation with the ceramists of the lab in the same building, and medically reviews the clinic's clinical pages.





E-max veneers are thin shells of lithium disilicate glass-ceramic bonded to the front of the teeth, combining natural translucency with several times the strength of feldspathic porcelain.
Who treats you here Dr. Duaa Emran Cosmetic Dentist · Dr. Kinan Bonni Dentist · Dr. Khalid Saeed Co-founder & Dentist · Dr. Somar Dahdal General Dentist
Every dentist’s licence can be checked on the DHA Sheryan medical directory.
Tell us what you would like to change. A dentist reviews it, and you receive a written plan with prices before any treatment.
Tell us what you would like to change. We reply on WhatsApp or by phone during opening hours.
Prefer to chat? Send a photo on WhatsApp
The material is chosen for the tooth, not the price list. These are the reasons it is chosen most often.
Lithium disilicate lets light pass through the biting edge the way enamel does, so the veneer does not read as a flat, opaque white.
Its strength means a veneer can be made thin, which usually means less enamel has to be removed to make room for it.
It is etched and bonded with adhesive cement. A veneer bonded to enamel is far more stable than one bonded mostly to dentine.
Glazed ceramic does not absorb coffee, tea or tobacco stains the way composite resin does over time.

Natural teeth are not one colour. They are warmer and more saturated near the gum, lighter through the body, and slightly translucent at the edge. A veneer made in a single flat shade skips all of that — which is why some veneer work is visible from across a room.
Because the laboratory is in the same building, shade is judged on your teeth in person rather than from a photograph.
Timings vary with the number of teeth and whether any preparatory treatment is needed; these are the stages every case follows.
Bite, gum health, existing fillings, photographs and a digital scan. Anything that would undermine veneers is identified here.
Visit 1Tooth proportions, midline and edge position are designed against your face and lip line, then reviewed with you.
Design stageThe design is transferred into a temporary trial you can see, speak with and photograph before anything irreversible happens.
Before preparationEnamel is reduced only where the approved design needs space. Temporaries are fitted the same visit.
Preparation visitThe veneers are milled from lithium disilicate, then characterised and glazed by the ceramist.
In our labShade and fit are checked before bonding; the bite is balanced so the edges do not take forces they were not designed for.
Fitting visitVeneers succeed or fail on shade, thickness and the edge where ceramic meets tooth. Those decisions are made between your dentist and a ceramist who can see your teeth, not from a photograph sent abroad.



Veneers for Creative Arts patients are designed and made at Creative Art Dental Lab, in the same building as the clinic. The laboratory is part of Creative Art Group, whose CEO, Basem Tobaji, is a celebrity smile designer with about 30 years in the dental field. Your dentist plans and fits the veneers; the laboratory makes them.
Each material has a job it does best. This is the honest summary; the right choice depends on the tooth.
| E-max (lithium disilicate) | Layered zirconia | Composite | |
|---|---|---|---|
| Appearance | Highly natural, translucent edge | Very good; slightly more opaque core | Good initially; surface dulls with time |
| Strength | High for a glass-ceramic | Highest core strength | Lowest; chips can be repaired |
| Typical use | Most front-tooth veneers and front crowns | Heavy-load teeth, dark or heavily restored teeth | Small corrections, trials, lower budgets |
| Preparation | Minimal to conservative | Usually more than E-max | Often none |
| Stain resistance | Excellent | Excellent | Picks up stain over years |
| Typical service life | Often 10–15 years or more with care | Comparable to E-max | Around 3–5 years before refreshing |
Service life ranges are typical figures from clinical experience and published reviews; bite, grinding and hygiene affect them more than the material. See E-max vs zirconia explained.
Unretouched photographs of patients treated at our clinic. Results depend on the case.



Individual results vary. Photographs are shown with patient consent.
The full veneers price guide shows how to compare quotes fairly.
The questions patients ask before booking, answered briefly, with the guide that covers each in depth.
The shade is chosen for your skin and eyes and tested as a mock-up first. See natural-looking veneers.
Preparation follows the approved design, often a fraction of a millimetre; some cases need none. See no-prep veneers.
Preparation is done under local anaesthetic; most people describe sensitivity for a few days at most. See do veneers hurt?
Every item is priced in the plan before you agree, and E-max often lasts 10–15 years or more with care. See how long veneers last.
Usually three to four visits over a few weeks once the teeth are healthy; start well before an event. See smile before a wedding.
Veneer cases are planned by the dentist who will fit them, with the ceramist involved from the design stage.
Dr. Duaa EmranCosmetic DentistVeneers, smile design & smile makeovers
Dr. Kinan BonniDentistVeneers, cosmetic & implant dentistry, full mouth rehabilitation
Dr. Khalid SaeedCo-founder & DentistCosmetic dentistry, veneers & implants
Dr. Somar DahdalGeneral DentistVeneers & smile makeovers
Dr. Marina AntoniukDentistAesthetic & functional rehabilitation · speaks RussianAt Creative Arts, veneer cases are planned by the treating dentist together with the ceramists in our in-house lab. Dr. Kinan Bonni is one of the dentists here whose work centres on veneers; his profile explains how the mock-up, shade checks and try-in fit together.
Independent sources for readers who want the wider evidence on this topic. Study figures are averages, not a promise for any one patient.
Veneers and Hollywood smiles at Creative Arts are planned by our cosmetic dentists and made in Creative Art Dental Lab in the same building. Veneers; Hollywood smile (10 teeth).





Yes. Emax (E-max) veneers, thin shells of lithium disilicate glass-ceramic, are designed digitally and made by Creative Art Dental Lab in the same building as the clinic. Because the lab is in the same building, the ceramist can see your teeth in person under the same light as your dentist when matching the shade, and small adjustments can often be made the same day at the try-in. Making the veneers usually takes three to five working days; they are never made on the day.
Every item is written in your plan, tooth by tooth, before any preparation.
E-max is a type of dental ceramic, so E-max veneers are a kind of porcelain veneer. "Porcelain" is often used loosely for all ceramics; strictly, traditional porcelain is feldspathic, while E-max is lithium disilicate, which is considerably stronger.
With good hygiene, regular check-ups and a night guard if you grind, 10 to 15 years is a realistic expectation and many last longer. Failures are usually caused by chipping from grinding, gum recession exposing the margin, or decay at the edge — not the ceramic wearing out.
Most E-max veneers need some enamel reduction, typically a fraction of a millimetre, and that is irreversible. A design-led preparation removes only what the approved design requires. In a limited number of cases a no-prep or minimal-prep approach is possible; an examination decides that.
For most front teeth, E-max looks more natural because it is more translucent. Layered zirconia is chosen where strength matters more, such as heavy bite forces or a very dark tooth that needs masking. Many cases use both, tooth by tooth.
Typically a consultation and records visit, a design and mock-up stage, a preparation visit with temporaries, and a fitting visit, plus a review. Preparatory treatment such as gum therapy or whitening adds time.
No. Ceramic does not respond to whitening gel. If you want your natural teeth lighter, whitening is done before the veneer shade is chosen so everything matches.
The final figure depends on the material chosen for each tooth and any work needed first, and is written in your plan after the examination and mock-up.
Creative Arts has a single clinic on Jumeira Street (Jumeirah Beach Road). Ask about parking when you book.
Our clinic in Jumeirah Open in Google Maps · Rated 4.8 on Google from 242 patient reviews (October 2026) — read them
Tell us what you would like to change. The clinic replies within working hours with an appointment time.
Or call us +971 4 342 4444Or message us on WhatsApp
A consultation ends with a diagnosis and a written, itemised plan — not a sales pitch. Book online, message us on WhatsApp, or call the clinic.
Before and after photos from veneer cases treated by Dr. Duaa Emran, Cosmetic Dentist at Creative Arts. See all nine cases on her profile.
Rated 4.8 on Google from 242 patient reviews (October 2026).
Tap a film to play it. Ceramic veneers and implant bridges are designed, milled, layered and finished by Creative Art Dental Lab, then fitted in the clinic.